SSH-1.99-Cisco-1.25
Key type: ssh-rsa
Key: AAAAB3NzaC1yc2EAAAADAQABAAAAgQCKilO+W+EyD7mQVVq1ThDJqhhEZANqgEMXz2oH7W5SWiWz
wzqiwiZwB8dZ8lFhfUShtd8MVULVfwRnUvtUpm6tzSWJtgYB1NbqvaZ0TdPf3jlK8u3RMqAc7rQB
suuko8mRxMDvBlF1YpcfNcMZ01r3BeyzYtlF3ZsMgcatqP1SWw==
Fingerprint: c2:7b:50:92:da:24:e3:f9:bb:c4:63:3c:08:db:fa:65

Kex Algorithms:
	diffie-hellman-group-exchange-sha1
	diffie-hellman-group14-sha1
	diffie-hellman-group1-sha1

Server Host Key Algorithms:
	ssh-rsa

Encryption Algorithms:
	aes128-ctr
	aes192-ctr
	aes256-ctr
	aes128-cbc
	3des-cbc
	aes192-cbc
	aes256-cbc

MAC Algorithms:
	hmac-sha1
	hmac-sha1-96

Compression Algorithms:
	none

-----------------------------------------------------------------------
Cisco Configuration Professional (Cisco CP) is installed on this device. 
This feature requires the one-time use of the username "cisco" with the 
password "cisco". These default credentials have a privilege level of 15.
 
YOU MUST USE CISCO CP or the CISCO IOS CLI TO CHANGE THESE  PUBLICLY-KNOWN 
CREDENTIALS

Here are the Cisco IOS commands.

username <myuser>  privilege 15 secret 0 <mypassword>
no username cisco

Replace <myuser> and <mypassword> with the username and password you want 
to use. 

IF YOU DO NOT CHANGE THE PUBLICLY-KNOWN CREDENTIALS, YOU WILL NOT BE ABLE 
TO LOG INTO THE DEVICE AGAIN AFTER YOU HAVE LOGGED OFF.
 
For more information about Cisco CP please follow the instructions in the 
QUICK START GUIDE for your router or go to http://www.cisco.com/go/ciscocp 
-----------------------------------------------------------------------


User Access Verification

Username: 

Recursion: enabled